Loading... Please wait...

Sign Up For Our Newsletter!

Jantex Discharge Base RB

  • Image 1
  • Garment printed with discharge base
1.75 LBS

Product Description

Jantex Discharge Base RB is a system used for printing onto gark garments.  The Jantex Discharge Base RB can be used "as is" to achieve a neutral ground color or concentrated pigments may be added to the Discharge Base RB to replace the original garment color in one print.

Jantex Discharge Base RB has a soft hand feel and is easy to print through a wide vareity of mesh counts.  It also incorporates high quality binders (glue) for proper adhesion.

When ready to print, add Jantex Parolite (activator) at up to 6% by weight and mix well.
Do not prepare more than needed as the discharge base has a shelf life of approximately 8 hours after activation.

Each substrate will react to discharge differently and some garments do not discharge.  Please check with your garment supplier and test thoroughly before running any production. 


Sizes Available:




Other Details

Mix up to 5% by weight of concentrated pigments.
320F for 2-3 minutes. Forced air is recomended
86-160 depending on application
Ready For Use:
No, mix with up to 6% Parolite. Use by itself or with JMS Pigments for color.
Product has a shelf life of apx. 8 hours after mixing Parolite

Add to Wish List

Click the button below to add the Jantex Discharge Base RB to your wish list.

You Recently Viewed...